GM-Genius 120 Booster 3.7....7.4 V
GM GENIUS 120 Booster Competition Brushless Controller for sensorless and sensored controlled brushless motors. Ideal controller for the Lehner Motor LMT 1920/5 CarLine (No. LMT1920 / 5 ). Suitable USB interface for programming: No. 7168.6 .
Features:
- Cooler operating temperature due to complete and lightweight aluminum housing and special PCB design with extra thick copper tracks and optimized switching edges. Extremely low center of gravity due to its flat design
- Highest efficiency thanks to new even faster 16-bit processor and optimized software with new simpler operating software. This gives you more travel time and more power.
- For brushless motors (see operating voltage) and brush motors (up to 7.4V)
- Telemetry functions
- Automatic Hall sensor detection
- Storing / reading of max. Speed, Maximum
Current , Temperature - New Braking and Power Programs
- 10 User Programmable Modes
- User Updatable Firmware
- Soldering Base for Easy Cable Replacement
Programmable Features:
- Power On / Off with Push Button - Low Voltage Control
: Automatically for Li / Ni batteries or in 0, 1V steps adjustable
- automatic brake, brake minimum, brake maximum, full brake, ABS brake function
- maximum reverse drive, various reverse modes
- automatic
throttle - soft start, soft brake
- current limit, starting current limit, turbo
- Station stick positions: full throttle point, zero point, full braking point, zero point width
- timing, variable timing functions
- 16 power curves for 3T - 21.5T
- settings for temperature shutdown, sensor mode, braking modes, motor type
- frequency 0.25 - 32 kHz
- For more functions see PC software!
Technical data:
- Dimensions approx. 44 x 31 x 29 mm
- BEC Booster 5.8 / short-term 3 V / A
- Operating voltage 3.7 ... 7.4 V
- Continuous current at 25 ° C (Brushless motors) 120A
- Recommended motors Star winding> = 3,0T, Delta winding> = 5T at 6V / Star winding> = 4,0T, Delta winding> = 7T at 7,4V
- Weight with cable 100g
- Weight without cable 64g
- Impulse current at 25 ° C 800A
- R DS on the FETs at 25 ° C 0.0004 Ohm W
- Reverse programmable
- Voltage drop @ 20 A 0.008 V
- Clock frequency 0.25 / 0.5 / 1/2/4/8/16 / 32kHz
- Overtemperature protection programmable
- Number of cells LiPo , LiIo 1 - 2 cell
number NiCd, NiMH 4 - 6
cell number Pb 3
SPECS
Technical information
BEC [V / A]: Booster 5,8 / short-term 3 Operating voltage neutral [V]: 3,7 - 7,4 Width [mm]: 31 Max. continous current [A]: 120 Field of application: Car Weight incl. leads [g]: 100 Height [mm]: 29 Pulse current at 25°C [A]: 800 Overall length [mm]: 44 Max. continous current [A]: 120 Reverse: programmable Voltage drop @20 A: 0,008 Pulse frequency [kHz]: 0,25 / 0,5 / 1 / 2 / 4 / 8 / 16 / 32 Telemetry warning: Yes Type: BEC Cell count, LiPo, Lilo, LiFe: 1 - 2 Cell count NiCd, NiMH: 4 - 6 Cell count Pb: 3